|
Ex. BRU100
The Jakobsen Machines was original equipped with Servo Drives type
ElectroCraft BRU100, but these drives also have a lot of other
indications as OSS100 and AM30 and named manufactures as OSAI,
Reliance Electric, Allen Bradley and Rockwell Automation. In
principle these drives are equal.
Hans Erik Misser ApS have normally a limited Stock of these renewed
Drives. The renewing of the Drives are performed by a company which
have employed technicians who in some case had been in service /
production of the original manufacturing companies, so they have a
very good knowledge how these Drives are constructed, and knows the
weakness of these drives, so these technicians know how to improve
the Drives.
It
is economical to exchange with a renewed drives compared to a time
consumption rebuilding to newer types, if the accident comes on,
that the Servodrive goes defective.
In
cooperation with this company, Hans Erik Misser ApS also have the
possibilities to offer repair of other Servo systems, but will
have no stock of these types of Servodrives. The repair time will
normally be between 2 to 3 weeks, but could be a good alternative to
exchange drives if low price is weighted higher, than delivery
time.
Immediately there are good repair facilities for:
ElectroCraft.
All BRU series: BRU100, BRU200 and BRU500
All MAX series: MAX41, MAX100, MAX250, MAX400/430 and MAX500
All IQ series
Siemens
Simodrive
610 og 611 Analog DC servodrives
Simodrive
6RA40, 6RB20 DC servodrives
Simoreg
6RA22, 6RA24, 6RA26 DC spindel drives
Masterdrive
6SE70 Standard CUVC types
Allen Bradley
Ultra series, most types
Panel view
The Motors for the servo systems can also in many cases be repaired.
Please contact us if you need more information of above service |
